English
русский
EspañolHydraulic Clutch Bearings Fitment Instructions
As installation of Hydraulic Clutch Bearings (also called concentric slave cylinders) may require specialist tools we will assume that you are a professional brake and clutch specialist and as such know how to install these units.
If you are a do-it-yourselfer or inexperienced in mechanical work we stress that you have the brake and clutch parts fitted by qualified installers only. This will ensure that the supplied items give many years of great service and severely lower the chances of incorrect fitment and premature failure.
WARNING: Brake and clutch items are safety critical items, as a result we recommend installation of CHENKAI OE replacement parts to be done by professional installers and/or workshops only.
Failure to fit these items correctly can cause major damage to the parts in question and other parts of the transmission.
NEVER MANUALLY COMPRESS THE UNIT WITHOUT PROPER LUBRICATION. THIS WILL DAMAGE INTERIOR SEAL AND CAUSE THE UNIT TO FAIL.
Hydraulic Clutch Bearings Troubleshooting
|
Symptoms |
Condition Hydraulic Bearing |
Probable Cause |
Solution |
|
Spongy feeling in clutch pedal |
Leaking |
Probably damaged interior seal |
Replace bearing |
|
Spongy feeling in clutch pedal |
No visible leak |
System not bled fully |
Re-bleed system |
|
Clutch wont engage |
Damaged bearing |
Incorrect fitment or adjustment |
Replace bearing |
|
Spongy feeling in clutch pedal |
Bearing came apart |
Bearing was fitted under pressure |
Replace bearing and check clutch |
|
Spongy feeling in clutch pedal |
Bearing leaking at bottom |
Bearing bolts were not tightened properly |
Replace bearing and check clutch |
|
Clutch wont engage |
Bearing soldered to clutch assembly |
Incorrect parts used during fitment |
Replace all affected parts with correct units |
